1000RPM Mild Steel Pipe Hydraulic Straightening Press Machine
1
MOQ
1000RPM Mild Steel Pipe Hydraulic Straightening Press Machine
Features Gallery Product Description Request A Quote
Features
Basic Infomation
Place of Origin: China
Certification: ISO9000-2008
Model Number: GJ160
High Light:

Mild Steel straightening press machine

,

Non ferrous straightening press machine

,

1000RPM hydraulic straightening press

Payment & Shipping Terms
Packaging Details: The machine must be entirely rust proof coated and painted using good quality rust proof coat and paint then oiled and packed in plastic to avoid rusting at sea. machine should be on wooden planks.
Delivery Time: 60 days
Payment Terms: TT/LC
Supply Ability: 20 per month
Specifications
Product Description

 

 

Steel Pipe Straightening Press Machine GJ160 1000 R / Min For Mmild Steel Pipe 

 

GJ160 Steel Pipe Fitting Straightening Press Machine

 

 

Quick Detail:

 

1. Type: Straightenner machine

2. Model Number: GJ160

3 Used in: the field of Carbon pipes,Non-ferrous metal pipes,and so on.

 

Description:

 

Introduction of the straightening machine


Straightening machines have been built with various methods of driving the rolls. Some machines have a separate drive motor for each roll, whereas the majority of modern machines usually use 2 drive motors, one motor for the top set of rolls and one for the bottom rolls. Regardless of the way the rolls are driven it is important that all rolls revolve at the same speed within about 1 to 2 rpm at maximum machine speed. In addition it is usual for the manufacture to build in an electronic load sharing system to ensure that the power needed to straighten is shared equally between the driving motors. Each time the rolls are changed a check of roll rpm and motor loading should be carried out.
If the rolls are not revolving at highly similar speeds, under load, tube straightness will be poor, roll wear will be rapid and under high straightening loads the motors may run out of power and stall.

 

Specifications:

 

No.

Name

Value

Unit

1

Maximum yield limit of material

750

Mpa

2

Outer diameter of pipe

60-160

mm

3

Wall thickness range of pipe

1-15

mm

4

Straightening speed

15-40

m/min

5

Throat diameter of straightening roll

320

mm

6

Length of straightening roll

470

mm

7

Adjusting angle of transmission roll

32-38

degree

8

Roller space of straightening roll

850

mm

9

Type of main motor

Z4-225-31

 

10

Power of main Motor

90*2

kw

11

Rotating speed of main motor

1000

r/min

12

Speed ratio of main speed reducer

16

mm

13

Maximum camber of steel pipe before straightening

30

mm/m

14

Camber of steel pipe after straightening

≤1.5

mm/m

 

 

 

                                            1000RPM Mild Steel Pipe Hydraulic Straightening Press Machine 0

 

Certification:

 

     1000RPM Mild Steel Pipe Hydraulic Straightening Press Machine 1  1000RPM Mild Steel Pipe Hydraulic Straightening Press Machine 2 

1000RPM Mild Steel Pipe Hydraulic Straightening Press Machine 31000RPM Mild Steel Pipe Hydraulic Straightening Press Machine 4

Recommended Products
Get in touch with us
Contact Person : Mr. Spark Xu
Tel : 13862229156
Fax : 86-512-56326816
Characters Remaining(20/3000)
ga('send', 'pageview');