News

Home > news > Company news about the comparison between Cold Rolling Tube Mills and Hot Rolling Processes

Events

news

Cases

86--13862229156

sparkxu308@gmail.com

86-512-56326816

Contact Now

the comparison between Cold Rolling Tube Mills and Hot Rolling Processes

2025-07-21

Cold Rolling Tube Mill vs Hot Rolling Process

Criteria	Cold Rolling Tube Mill	Hot Rolling Process
Application Scope	Precision stainless steel tubes, small-diameter & thin-wall tubes	Large-diameter, thick-wall pipes, structural or industrial pipes
Surface Quality	Excellent finish (Ra ≤ 0.8μm), no oxide scale	Surface with oxide scale, requires pickling or polishing
Dimensional Accuracy	Tight tolerance (±0.05mm for OD and WT)	Wider variation, often needs secondary machining
Mechanical Properties	Controllable strength and hardness for high-spec requirements	Moderate strength, good ductility but less uniform
Processing Temperature	Room temperature or slightly heated (<300°C), fine grain control	Very high temperature (>1000°C), coarser grain structure
Suitable Materials	Austenitic stainless steel, copper, titanium, high-strength alloy	Carbon steel, low alloy steel, mild steel
End Use Applications	Medical, automotive, electronics, food-grade, heat exchangers, aerospace	Construction pipes, structural tubing, general-purpose pipelines
Energy & Environmental Impact	Low energy consumption, clean, low emissions	High energy usage, heavy smoke and emissions
Equipment Investment & Maintenance	High automation, low maintenance cost	Lower initial investment, higher wear for large-scale production

Summary Recommendations:

Choose Cold Rolling if your application requires high precision, smooth surface finish, and stable mechanical properties — ideal for medical, automotive, instrumentation, and food-grade tubing.

Choose Hot Rolling if your goal is low-cost, large-diameter, low-precision pipes for general structural or industrial use.

Send your inquiry directly to us