Send Message
Zhangjiagang Hengli Technology Co.,Ltd 86--13862229156 sparkxu308@gmail.com
Pipe Fitting Straightening Press Machine

Pipe Fitting Straightening Press Machine

  • High Light

    straightening and cutting machine

    ,

    tube straightening machine

  • Place of Origin
    China
  • Certification
    ISO9000-2008
  • Model Number
    GJ350
  • Minimum Order Quantity
    1
  • Packaging Details
    The machine must be entirely rust proof coated and painted using good quality rust proof coat and paint then oiled and packed in plastic to avoid rusting at sea. machine should be on wooden planks.
  • Delivery Time
    60 days
  • Payment Terms
    TT/LC
  • Supply Ability
    20 per month

Pipe Fitting Straightening Press Machine

 

 

Pipe Fitting Straightening Press Machine , Straightening And Ccutting Mmachine

 

GJ350 Steel Pipe Fitting Straightening Press Machine

 

 

Quick Detail:

 

1. Type: Straightenner machine

2. Model Number: GJ350

3 Used in: the field of Carbon pipes,Non-ferrous metal pipes,and so on.

 

Description:

 

Introduction of the straightening machine


Straightening machines have been built with various methods of driving the rolls. Some machines have a separate drive motor for each roll, whereas the majority of modern machines usually use 2 drive motors, one motor for the top set of rolls and one for the bottom rolls. Regardless of the way the rolls are driven it is important that all rolls revolve at the same speed within about 1 to 2 rpm at maximum machine speed. In addition it is usual for the manufacture to build in an electronic load sharing system to ensure that the power needed to straighten is shared equally between the driving motors. Each time the rolls are changed a check of roll rpm and motor loading should be carried out.
If the rolls are not revolving at highly similar speeds, under load, tube straightness will be poor, roll wear will be rapid and under high straightening loads the motors may run out of power and stall.

 

Specifications:

 

No.

Name

Value

Unit

1

Maximum yield limit of material

850

Mpa

2

Outer diameter of pipe

180-350

mm

3

Wall thickness range of pipe

1-35

mm

4

Straightening speed

50-25

m/min

5

Throat diameter of straightening roll

520

mm

6

Length of straightening roll

700

mm

7

Adjusting angle of transmission roll

29-35

degree

8

Roller space of straightening roll

1350

mm

9

Type of main motor

Y355M3-4

 

10

Power of main Motor

315*2

kw

11

Rotating speed of main motor

1480

r/min

12

Speed ratio of main speed reducer

17.43

mm

13

Maximum camber of steel pipe before straightening

30

mm/m

14

Camber of steel pipe after straightening

≤1.5

mm/m

 

 

 

                                            Pipe Fitting Straightening Press Machine 0

 

Certification:

 

     Pipe Fitting Straightening Press Machine 1  Pipe Fitting Straightening Press Machine 2 

Pipe Fitting Straightening Press Machine 3Pipe Fitting Straightening Press Machine 4

ga('send', 'pageview');