Send Message
Home > products > Pipe Shrinking Machine >
PVC Cable Pipe Shrink Wrapping Machine Pipe Stranding Production Line

PVC Cable Pipe Shrink Wrapping Machine Pipe Stranding Production Line

11kw Shrink Wrapping Machine

Pipe Shrink Wrapping Machine

PVC Cable Pipe End Forming Machine

Place of Origin:

Jiangsu China

Brand Name:

Xingyu

Certification:

ISO9001-2000

Model Number:

G800

Contact Us

Request A Quote
Product Details
Name:
Shrink Wrapping Machinery
Time For One Reduction:
4-6S
Screw Material:
38CrMoAl
Screw Diameter (mm):
90
Screw Design::
Single-screw
Key Selling Points::
Energy Saving
Product Description

Pipe Stranding Production Line Pvc Cable Pipe Machine

 

plastic pipe extrusion line used for water supply,gas supply,coal mine,solar energy,floor heating ,communication area and so on. The production line consists of new generation High efficiency single screw extruder(38:1), pipe mould, vacuum calibration tank, spraying cooling tank,haul-off unit, cutter stacker, etc. single screw extruder and haul-off unit adopts imported AC inverter, both electrical components and driving motor use the quality brand.
 

Quick Detail:

1. Type: pipe-shrinking machine

2. Model Number: G800

3. Used in: G800 pipe-shrinking machine is for making pipe before drawing machine,the material can be any metal.G400 pipe-shrinking machinecan roll pipe diameter of 16--40mm to 10--35mm.

 

Operating Instructions:

No.

Name

Technical Parameters

Unit

1

Range of Reduction
 for Diameter

10 ~ 35

mm

2

Diameter of Mother Tube

16 ~ 40

mm

3

Time for
one reduction

4 ~ 6

s

4

Motor

11

kw

5

System pressure

52

Mpa

6

Machine Size

900*1150*1310

mm

7

Machine weight

1750

kg

 

 

G400 pipe-shrinking  machine operations and processes

 

1. Take out the mould by rotating it according to arrow direction, no reverse rotation allowed.

2. Moulds can be changed according to different specifications.

3. Head length can be adjusted by middle adjusting rod, loose the belt wheel screw,  adjust the length and fasted the screw again.

4. Pour in 80% diesel and 20% engine oil, as the oil pump capacity is big, oil box entrance valve should be fully open, machine valve fix a little oil is ok.

5. After the umbrella-block wear down and the gap becomes big, you can put a gasket between umbrella block and the mould, but the gasket can not be too thick so that machine won't get stuck.

6. The lubrication oil should be changed after it gets dirty.

 

Safety Precautions

 

1, Place the machine on a fixed horizontal surface and the calibration level, the machine is stable.

2, Check the oil level before use, to keep the hydraulic oil target position in 1/2 or more.

3, Check the motor rotation, such as rotation error, please adjust the power wiring.

4, When the state machine automatically, please confirm the accuracy of the input data.

5, When the machine is operating, safety, the hands, the body, such as near the action area is prohibited.

6, People must be dedicated machine operation, and the operator should be able to reach and stand within the scope of the emergency stop bu tton.

7, Machine must be grounded.

8, When remove mold, must turn off the power.

9, Please refuel oil regularly.

10, Keep the machine and the environment clean.

11, Not allowed to work in the dust, conductive particles and acids and other places.

 

Factory picture:

PVC Cable Pipe Shrink Wrapping Machine Pipe Stranding Production Line 0

 

Part of the machine:

PVC Cable Pipe Shrink Wrapping Machine Pipe Stranding Production Line 1

Send your inquiry directly to us

Privacy Policy China Good Quality Cold Pilger Mill Supplier. Copyright © 2014-2024 coldpilgermill.com . All Rights Reserved.
ga('send', 'pageview');